(Direct Link) Tenda Firmware i12 Wireless N300 Ceiling Access Point

                                

                                

Download | Tenda i12 Firmware V1.0.0.10(3805)
Download | Tenda i12 Firmware V1.0.0.11(3862)_EN
Download | Tenda i12 Firmware V1.0.0.4(2084)_EN

<< Tenda i6  VS  Tenda i9  VS Tenda i12 >>

Tenda i12 Default Settings:
    IP Address: 192.168.0.254
    Login Username:admin
    Login Password: admin

Tenda i12 Wireless N300 Ceiling Access Point Specifications:
Frequency Range: 2.4GHz
Maximum wireless speed: 300Mbps
Maximum Concurrent Clients: 40
Interface: 1 x GE port
Antenna: Internal 2 x 2dBi Omni
Maximum Power Consumption: 11W
LED: SYS
Power Supply:  12V=1A
Operating Mode: AP/Client+AP/Repeater
Standard&Protocol: IEEE 802.11n/g/b
Features:
- Enable/Disable Wireless Radio
- SSID Hidden
- Wireless Client isolation
- Sensitivity Threshold
- WMM Capable
- Wireless Multicast Forwarding
- APSD Capable
- Wireless Access Control
- SSID-To-VLAN tagging
Security: 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transmit Power: Adjustable power by 1dBm
DHCP server:
-  DHCP Server
- Clients list
Schedule Reboot: Support
Page timeout: support
Network diagnose: Ping, Channel Scan
Management Tool:
- Time&Date Setting
- System Log
- Firmware update
- Backup/Restore Configuration
- Username Management
Certification: FCC/CE/RoHS
Dimension: 144.2*144.2*40.12mm

*****
Tenda Firmware i12 Wireless N300 Ceiling Access Point network. the in APs multiple deploys you when management and deployment easier bring M3 Controller AP by managed be can i12 Managed Centralized available. not or scarce are outlets power where areas deployed i12. So to cable Ethernet single an over carried data both allows compliant, which 802.3at PoE is panel back on port The optimized. coverage stronger signal wireless power. Thus, the output RF improve simplifier independent adopt.